Standard Horizon HX460S, Руководство пользователя

Страница: 17 / 32

HX460S Page 15
4.12 OPERATING ON CHANNEL 13
Channel 13 is used at docks, bridges and for maneuvering in port. Mes-
sages on this channel must concern navigation only, such as meeting and
passing in restricted waters. In emergencies and when approaching blind
river bends, high power is allowed. Holding down the
H/L key will change
the power output from 1 Watt (
) to 5 Watts ( ); if pressed and held again
2.5 Watts (
) will be selected. When the
PTT switch is released, the trans-
ceiver will revert to low power. Press and hold in the H/L key again if you
need High power on a subsequent transmission.
4.13 OPERATING ON CHANNEL 67
When channel 67 is used for navigational bridge-to-bridge traffic between
ships, High or Medium power may be used temporarily (in the USA band) by
pressing the
H/L key. When the PTT switch released, the transceiver will
revert to low power.
4.14 PRESET CHANNELS (A ~ E): INSTANT ACCESS
Five user-assigned channels can be programmed for instant access. Press-
ing the
PRESET key provides activates the user-assigned channel bank. If
the PRESET key is pressed and no channels have been assigned, an alert
beep will be emitted twice from the speaker.
4.14.1 Programming
Hold down the PRESET key, and press the [
p
] or [
q
] key (repeatedly, if
necessary) until the desired channel number (from among the regular oper-
ating channels) is displayed.
With the desired channel number displayed, release the PRESET key. The
“ A ” notation will appear on the LCD display, indicating that the displayed
channel is now saved in the Preset Channel A position.
Repeat steps 1 and 2 to program the desired channels into Preset Channels
b ~ E.
To delete a Preset Channel, hold down the PRESET key and press the [
p
]
or [
q
] key until the Preset Channel number to be deleted is displayed, then
release the PRESET key.