Standard Horizon ECLIPSE GX1300E Скачать руководство пользователя

Страница: 104 / 112

GX1300E

Page 104

13 WARRANTY

PLEASE NOTE

To receive warranty service in Europe, for European Sourced products,

the purchaser must return the Product, shipment and insurance prepaid

to the purchasing dealer or authorized Service Centre in Europe. Contact

details for warranty in Europe are available from the dealer in your coun-

try or from www.standardhorizon.co.uk where details of warranty terms

and contact details for Europe can be obtained.

STANDARD HORIZON LIMITED WARRANTY

STANDARD HORIZON (the Marine Division of Yaesu Musen Co. Ltd)

warrants, to the original purchaser only, each new Marine Product (“Product”)

manufactured and/or supplied by STANDARD HORIZON against defects in

materials and workmanship under normal use and service for a period of 3

years from the date of purchase.
In the event of a defect, malfunction or failure of the Product during the

warranty period, STANDARD HORIZON’s liability for any breach of contract

or any breach of express or implied warranties in connection with the sale

of Products shall be limited solely to repair or replacement, at its option,

of the Product or part(s) therein which, upon examination by STANDARD

HORIZON, appear to be defective or not up to factory specifications.

STANDARD HORIZON may, at its option, repair or replace parts or subas-

semblies with new or reconditioned parts and subassemblies.
STANDARD HORIZON will not warrant installation, maintenance or service

of the Products. In all instances, STANDARD HORIZON’s liability for damag-

es shall not exceed the purchase price of the defective Product.
STANDARD HORIZON will pay all labor and replacement parts charges

incurred in providing the warranty repair service except where purchaser

abuse or other qualifying exceptions exist. The purchaser must pay any

transportation expenses incurred in returning the Product to STANDARD

HORIZON for service.
This limited warranty does not extend to any Product which has been

subjected to misuse, neglect, accident, incorrect wiring by anyone other

than STANDARD HORIZON, improper installation, or subjected to use in

violation of instructions furnished by STANDARD HORIZON, nor does this

warranty extend to Products on which the serial number has been removed,

Содержание ECLIPSE GX1300E

















































































































Результаты поиска

Содержание ECLIPSE GX1300E

Отзывы:

Похожие инструкции для ECLIPSE GX1300E

Бренды по названию

Популярные бренды

Standard Horizon ECLIPSE GX1300E, Руководство пользователя

Результаты поиска

Содержание ECLIPSE GX1300E

Отзывы:

Похожие инструкции для ECLIPSE GX1300E

Бренды по названию

Популярные бренды