Standard Horizon 30063X30 Скачать руководство пользователя страница 83 | Manualshive

Страница: 83 / 88

background image

Page 83

GX3500S

16. WARRANTY

Marine Products Limited Warranty

STANDARD HORIZON (a division of Vertex Standard) warrants, to the original
purchaser only, each new Marine Communications Product (“Product”) manu-
factured and/or supplied by STANDARD HORIZON against defects in materi-
als and workmanship under normal use and service for a period of time from
the date of purchase as follows:

Fixed Mount and Portable Transceivers

1 year - if purchased before 01/01/91
3 years - if purchased between 01/01/91 and 01/01/94
3 years Waterproof - if purchased after 01/01/94

Loud hailers

1 year - if purchased before 01/01/91
3 years - if purchased after 01/01/91

Associated Chargers

1 year - if purchased before 01/01/91
3 years - if purchased after 01/01/91

Associated Batteries

- 1 year. Note: Batteries will be deemed deflective only if

storage capacity drops below 80% of rated capacity or if leakage develops.

Associated Accessories

- 1 year. Includes: Microphones/Handsets, External

Speakers, Antennas, Carrying Accessories, Power Supplies, and Signaling Boards.

To receive warranty service, the purchaser must deliver the Product, transpor-
tation and insurance prepaid, to STANDARD HORIZON (a division of Vertex
Standard), Attention Marine repairs 10900 Walker Street, Cypress, CA 90630.
Include proof of purchase indicating model. serial number, and date of pur-
chase. STANDARD HORIZON will return the Product to the purchaser freight
prepaid. Products purchased prior to January 1, 1991 will bear the STANDARD
HORIZON warranty terms in effect prior to that date.

In the event of a defect, malfunction or failure of the Product during the war-
ranty period, STANDARD HORIZON’s liability for any breach of contract or any
breach of express or implied warranties in connection with the sale of Products
shall be limited solely to repair or replacement, at its option, of the Product or
part(s) therein which, upon examination by STANDARD HORIZON, appear to
be defective or not up to factory specifications. STANDARD HORIZON may, at
its option, repair or replace parts or subassemblies with new or reconditioned
parts and subassemblies. Parts thus repaired or replaced are warranted for the
balance of the original applicable warranty.

Vertex Standard Co., Ltd.

FCC ID: K6630063X30 / IC ID: 511B-30063X30

«
...
81
82
83
84
85
...
»

Содержание 30063X30

























































































Отзывы:

Нет отзывов

Похожие инструкции для 30063X30

Бренд: Varec Страницы: 24

Бренд: Icom Страницы: 42

Бренд: Icom Страницы: 32

Бренд: Icom Страницы: 39

Бренд: Icom Страницы: 7

Бренд: Icom Страницы: 32

Бренд: Icom Страницы: 13

Бренд: Icom Страницы: 294

Бренд: Icom Страницы: 4

Бренд: Icom Страницы: 2

Бренд: Icom Страницы: 8

Бренд: Icom Страницы: 36

Бренд: Icom Страницы: 32

Бренд: Icom Страницы: 96

Бренд: Icom Страницы: 24

Бренд: Icom Страницы: 48

Бренд: Icom Страницы: 392

Бренд: Icom Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды