Standard Horizon 30063X30, Руководство пользователя

Страница: 59 / 88

Page 59 GX3500S
11.9 MANUAL INPUTTING OF THE GPS LOCATION
(
LAT/ LON
)
You may send the Latitude/Longitude of your vessel manually even if the
GX3500S is not connected the GPS receiver unit.
After the position is entered, transmitting a DSC Distress, Position Request, or
Position Send will contain the manually entered position.
1. Press and hold down the [ CALL
(
MENU
)] key until
“ Radio Setup ” menu appears.
2. Turn the CHANNEL selector knob to select “ DSC
Setup ” menu.
3. Press the [ ENT
] key, then select “
POS Input ” with
the CHANNEL selector knob.
4. Press the [ ENT
] key. The transceiver will beep, and
the display will be as shown in the illustration on the
right.
5. Enter the your local time from the keypad by the 24-
hour system on the UTC time, then press the [ ENT
]
key.
6. Enter the Latitude/Longitude of your vessel location
by the keypad, then press the [ ENT
] key. To select
North (N) press [ 6
(
NAV
)] key, South (S) press the
[
7
(
SCRM
)] key, East (E) press the [
3
(
SCAN
)] key or
West (W) press the [ 9
(
FOG
)] key.
7. To store the data entered, press the [ 16/9
] key to exit
this menu and return to radio operation mode.
Vertex Standard Co., Ltd.
FCC ID: K6630063X30 / IC ID: 511B-30063X30