ASSEMBLY INSTRUCTIONS
Hook
Cable End
1.
2.
3.
Socket
Plug End
Hook
9
STEP 4
Refer to illustration 1 below. Turn the
TENSION KNOB(31)
counterclockwise as far as it can go, so the
HOOK
moves down to the lowest position. Remove the black strap from the
TENSION CABLE(30).
Connect the
CABLE END
of the
TENSION CABLE(30)
to the
HOOK
on the
TENSION KNOB(31)
as shown in illustration
2.
Pull firmly on the
TENSION CABLE(30)
so that enough cable is available to insert its
PLUG END
into
the
SOCKET
of the
TENSION KNOB(31).
The
TENSION KNOB(31)
and the
TENSION CABLE(30)
should
look as shown in illustration 3.
Adjust the
TENSION KNOB(31)
and verify that the
HOOK
moves when the
TENSION KNOB(31)
is adjusted.
STEP 5
Hook
the
TENSION KNOB(31)
into the square hole on the
UPRIGHT(6)
and secure with
FLAT HEAD
SCREW(M5x0.8x15mm)(67).
