ASSEMBLY INSTRUCTIONS
STEP 5
NOTE:
Refer to the illustration below. Be careful not to damage the Sensor on the
METER(13)
when
disassembling or installing the
METER(13).
By hand or by using a simple tool remove the
METER(13)
from the
LEFT
and
RIGHT COVERS(35, 36).
Install an AAA battery into the
METER(13),
the battery is not included. See page 9 for detailed battery
installation instructions. Press the
METER(13)
back into the opening between the
LEFT
and
RIGHT
COVERS(35, 36).
STEP 4
NOTE:
The
RIGHT PEDAL(38)
has
R
stamped on the end of the pedal shaft. The
RIGHT PEDAL(38)
has right hand threads and is tightened by turning clockwise. The
LEFT PEDAL(37)
has
L
stamped on the end of the pedal shaft. The
LEFT PEDAL(37)
has left hand threads and is
tightened by turning counterclockwise.
Thread the
RIGHT PEDAL(38)
to the right side of the
CRANK(5)
as shown. Tighten the pedal securely.
The shoulder of the
PEDALS(37, 38)
should be in contact with the
CRANK(5)
when securely tightened.
Do the same to attach the
LEFT PEDAL(37)
to the left side of the
CRANK(5).
8
Shoulder
Sensor
Содержание inStride Total Body Cycle
Страница 14: ...PRODUCT PARTS DRAWING 14 FRONT BACK...
Страница 17: ...NOTES 17...
