STEP 1
Lift up the
LEFT
and
RIGHT PEDAL ARMS(2, 3).
Insert the
PULLEY BRACKET(7)
into the Collar on
the
MAIN FRAME(1).
Wrap the
CABLE(9)
around the
PULLEY(8)
and press the two
PEDAL ARMS(2, 3)
down. Refer to illustration
A.
NOTE:
Always make sure that the
CABLE(9)
is properly seated in the groove on the
PULLEY(8)
before
using the
InStride® Pro Electronic Stepper.
STEP 2
Refer to illustration
B.
Install one
AA
battery into the back of the
METER(13),
the battery is not
included. See page 9 for detailed battery installation instructions. Plug the
SENSOR WIRE(11)
into the
METER(13),
then slide the
METER(13)
onto the
MOUNTING
CAP(12).
NOTE:
Please be careful not to damage the
SENSOR WIRE(11)
when attaching the
METER(13)
to the
MOUNTING CAP(12).
6
Collar
A.
B.
ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Service section and order the part needed,
e-mail us at [email protected], or call us toll free at 1-800-375-7520 (in the
U.S.). Our Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
Содержание InStride Pro
Страница 12: ...PRODUCT PARTS DRAWING BACK FRONT 12...
