SET UP INSTRUCTIONS
10
Equipment Mat
Adjust the
LEVELING CAPS(44)
on the
REAR STABILIZER(3)
so that the
INSTRIDE
ELLIPTICAL
sets on the floor without rocking.
Grasp the
HANDRAIL(7)
and
REAR STABILIZER(3)
to move the
INSTRIDE ELLIPTICAL,
two people are required for moving. Do not use the Pedal Arms to move the
INSTRIDE
ELLIPTICAL.
The Pedal Arms will move and may pinch your hand or fingers.
LEVELING:
MOVING:
Locate and read the
WARNING LABEL(69)
on the
INSTRIDE ELLIPTICAL.
Make sure that
all users read the
WARNING LABEL(69).
CAUTION:
FUNCTION INSPECTION:
Visually inspect the
INSTRIDE ELLIPTICAL
to verify that assembly is as shown in the above illustration.
Check the function of the
INSTRIDE ELLIPTICAL.
Stand on the foot pedals and place your hands at a
comfortable position on the handrail. Slowly move your highest foot forward and follow the natural path of
the machine. Turn the crank slowly through one complete revolution to verify that the drive train functions
properly. Adjust the
TENSION KNOB(22)
and verify that it functions properly.
Place the
INSTRIDE ELLIPTICAL
in the area where it will be used. It is recommended that the
INSTRIDE
ELLIPTICAL
be placed on an equipment mat. The
INSTRIDE ELLIPTICAL
is approximately 33 1/2" long
x 17 3/4" wide x 46 3/4" tall. (These dimensions may vary up to one inch.) An area 4 feet wide x 5.5 feet long
is required for safe operation of the
INSTRIDE ELLIPTICAL.
Make sure that adequate space is available
for access to and passage around the
INSTRIDE ELLIPTICAL.
Содержание INSTRIDE 55-1615
Страница 16: ...PRODUCT PARTS DRAWING BACK FRONT 16 Strap Strap...
Страница 20: ...20 NOTES...
Страница 21: ...21 NOTES...
