ASSEMBLY INSTRUCTIONS
STEP 7
Place the
LEFT NOSE COVER(34)
and
RIGHT NOSE COVER(35)
at both sides of the
UPRIGHT(3).
Bolt
the nose covers together with the
ROUND HEAD SCREW(M5x0.8x35mm)(71)
on the top.
Then slide the
nose covers down and attach them to the
MAIN FRAME(1)
with
ROUND HEAD SCREW(M5x0.8x35mm)(71).
STEP 8
Refer to the inset drawing. Lift up the
RIGHT PEDAL ARM(7)
slightly. Then place a
ROLLER COVER(33)
to cover the
ROLLER(30).
Snap the
ROLLER COVER(33)
into the slots at both sides of the
ROLLER(30)
in the
MAIN FRAME(1).
Repeat on the left side.
9
Slot
