Stamina A150-200, Руководство пользователя

Страница: 11 / 22

Place the AVARI® Recumbent Bike in the area where it will be used. It is recommended that the
AVARI® Recumbent Bike be placed on an equipment mat. The AVARI® Recumbent Bike is
approximately 61.8 inches long (max.) x 27.5 inches wide x 36 inches tall. (These dimensions may
vary up to one inch.) An area 4 feet wide x 7 feet long is required for safe operation of the
AVARI®
Recumbent Bike. Make sure that adequate space is available for access to and passage around the
AVARI® Recumbent Bike.
LEVELING: Adjust the LEVELING CAPS(40) on the REAR STABILIZER(4) so the bike sits on the
floor without rocking. Remove and reposition the LEVELING CAPS(40) on the REAR
STABILIZER (4) to level the AVARI® Recumbent Bike.
MOVING: The AVARI® Recumbent Bike must be lifted to be moved. Two people are required to
grasp the
FRONT STABILIZER(2)
and the
REAR STABILIZER(4),
lift and move.
FUNCTION INSPECTION:
Visually inspect the AVARI® Recumbent Bike to verify that assembly is as shown in the above
illustration. Check the function of the
AVARI® Recumbent Bike
by turning the crank slowly through one
complete revolution to verify that the drive train functions properly. Adjust the TENSION KNOB(25) and
verify that it functions properly.
CAUTION: Locate and read the WARNING LABEL(71) on the AVARI® Recumbent Bike. Make sure
that all users read the
WARNING LABEL(71)
before using the product.
SET UP INSTRUCTIONS
11
EQUIPMENT MAT
Please note the Rear Frame of the Recumbent Bike
is adjustable. To determine mat size, use the length
measurement when the Rear Frame is adjusted to
its maximum length (approximately 61.8 inches).
Meijer.com