ASSEMBLY INSTRUCTIONS
STEP 8
NOTE:
The
RIGHT PEDAL(35)
has
R
stamped on the end of the pedal shaft. The
RIGHT PEDAL(35)
has
right hand threads and is tightened by turning clockwise. The
LEFT PEDAL(34)
has
L
stamped on
the end of the pedal shaft. The
LEFT PEDAL(34)
has left hand threads and is tightened by turning
counter clockwise.
Thread the
RIGHT PEDAL(35)
to the right side of the
CRANK(9)
as shown. Tighten the pedal securely. Do
the same to attach the
LEFT PEDAL(34)
to the left side of the
CRANK(9).
STEP 9
Install two AA batteries into the
METER(27),
the batteries are not included. See page 13 for detailed battery
installation instructions. Plug the
SENSOR WIRE(28)
into the
METER(27),
and push the excess wires back
into the
METER POST(26).
Place the
METER(27)
on the plate on the
METER POST(26)
and secure with
ROUND HEAD SCREWS(M5x0.8x15mm)(54).
NOTE:
Be careful not to damage the wires when attaching the
METER(27)
to the
METER POST(26).
10
Meijer.com
Содержание A150-200
Страница 18: ...PRODUCT PARTS DRAWING 18 FRONT BACK Strap A Strap B Meijer com...
Страница 21: ...NOTES 21 Meijer com...
