Stamina 55-4266, Руководство пользователя

Страница: 8 / 23

ASSEMBLY INSTRUCTIONS
STEP 2
Remove your AeroPilates® Reformer 266 from its packaging, placing the product on its side with
the
LOCKING PIN(26)
side upward. Remove the
LOCKING PIN(26)
and unfold the
MAIN FRAME
ASSEMBLY separating the half that has the attached LOCKING PIN(26). When completed, the frame
should form a "V" with the frame ends separated approximately three feet.
STEP 3
Attach the four RUBBER FEET(25) to the FRONT FRAME(1) and REAR FRAME(2) with ROUND HEAD
SCREWS(M5x0.8x35mm)(37). The ROUND HEAD SCREWS(M5X0.8X35mm)(37) are already in the
RUBBER FEET(25). Attach the WHEELS(24) to the FRONT FRAME(1) with WASHERS(M8)(46) and
NYLOCK NUTS(M8x1.25)(40).
STEP 4
Unfold your AeroPilates® Reformer 266 to a flat position by moving the FRONT FRAME(1) away
from the platform end of the
REAR FRAME(2)
in a clockwise position until fully extended. Lower the
AeroPilates® Reformer 266 so all four RUBBER FEET(25) are flat on the floor.
8