Stamina 15-0321A Скачать руководство пользователя

Страница: 4 / 23

BEFORE YOU BEGIN

THE FOLLOWING TOOLS ARE INCLUDED

FOR ASSEMBLY :

Wrench

Allen Wrench (5mm) w/ Screwdriver

Seat Frame

Lever

Caution Label

Front Stabilizer

Right Crank

Seat

Right Pedal

Handrail

Rear Stabilizer

Endcap

Meter

Tension Knob

Desktop

Wheel

Back Support

Back Cushion

Upright

Endcap

Rear Frame

Thank you for choosing the

STAMINA® Cycling

Workstation.

We take great pride in producing this

quality product and hope it will provide many hours

of quality exercise to make you feel better, look

better, and enjoy life to its fullest.

It's a proven fact that a regular exercise program

can improve your physical and mental health.

Too often, our busy lifestyles limit our time and

opportunity to exercise. The

STAMINA® Cycling

Workstation

provides a convenient and simple

method to begin your journey of getting your body

in shape and achieving a happier and healthier

lifestyle.

Before reading further, please review the

drawing below and familiarize yourself with the

parts that are labeled.

Read this manual carefully before using the

STAMINA® Cycling Workstation.

Although Stamina constructs its products with

the finest materials and uses the highest standards

of manufacturing and quality control, there can

sometimes be missing parts or incorrectly sized

parts. If you have any questions or problems with

the parts included with your

STAMINA® Cycling

Workstation,

please do not return the product.

If a part is missing or defective, please go to

staminaproducts.com under the Service section

and order the part needed, or call us toll free at

1-800-375-7520 (in the U.S.). Our Customer Care

Staff is available to assist you from 7:30 A.M. to

5:00 P.M. (Central Time) Monday through Thursday

and 8:00 A.M. to 3:00 P.M. (Central Time) on

Friday.

Be sure to have the name and model number of

the product available when you contact us.

Right Cover

Strap

Left Pedal

Endcap

Right Front Cover

Ball Pin

Pulse Sensor

Содержание 15-0321A
























Результаты поиска

Содержание 15-0321A

Отзывы:

Похожие инструкции для 15-0321A

Бренды по названию

Популярные бренды

Stamina 15-0321A, Руководство пользователя

Результаты поиска

Содержание 15-0321A

Отзывы:

Похожие инструкции для 15-0321A

Бренды по названию

Популярные бренды