manualshive.com logo in svg

Stamina 15-0321A, Руководство пользователя

Поделиться
Скачать
Stamina 15-0321A Скачать руководство пользователя страница 13

WEIGHT LIMITATIONS

WARNING: 

Serious injuries can occur from 

STAMINA® Cycling Workstation

 tip-over. To help prevent 

tip-over:

  Do not exceed listed weight limits

  Never allow children to climb or hang on 

the 

STAMINA® Cycling Workstation

  Do not lean on the desktop in any direction

OPERATIONAL INSTRUCTIONS

SEAT ADJUSTMENT

1. Turn the 

ADJUSTMENT  KNOB(33)

 to loosen, then pull 

the 

ADJUSTMENT KNOB(33)

 to release the pin. Slide the 

SEAT FRAME(6)

 until the 

SEAT(37)

 is at the proper height. 

Release the 

ADJUSTMENT  KNOB(33)

 making sure the 

pin catches in one of the holes of the 

SEAT FRAME(6)

 and 

tighten the 

ADJUSTMENT KNOB(33).

Proper seat adjustment is important. 

1.  Do not attempt to adjust the seat while you are 

on the 

STAMINA® Cycling Workstation.

2.  Always tighten the 

ADJUSTMENT KNOB(33)

 

after adjusting the seat to a new position.

To increase the load, turn the 

TENSION KNOB(58)

 clockwise.

To decrease the load, turn the 

TENSION KNOB(58)

  counterclockwise.  

There are eight levels for the load adjustment.

LOAD ADJUSTMENT

2.  Sit on the seat and place your feet on the pedals. You should 

be able to move through a complete pedal stroke without 

locking your knees or shifting your hips on the seat. The seat 

is too close to the pedals if you have more than a slight bend 

in your knees at the bottom of the pedal stroke. The seat is 

too far from the pedals if you have to completely straighten 

your knees at the bottom of the pedal stroke. Refer to the 

illustration.

CAUTION:

13

Содержание 15-0321A
























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды