Stamina 15-0321A, Руководство пользователя

Страница: 12 / 23

OPERATIONAL INSTRUCTIONS
12
USING THE FITNESS METER
Automatically scans each function of TIME, SPEED, DISTANCE, CALORIES, ODOMETER,
and PULSE in sequence, display changes every six seconds. Press and release the button until
"SCAN" appears on the display.
Displays the time from one second up to 99:59 minutes.
Displays the current speed from zero to 999.9 miles per hour.
Displays the distance from zero to 999.9 miles.
Displays the calories burned from zero to 999.9 Kcal.
The calorie readout is an estimate for an average user. It should be used only as a comparison
between workouts on this unit.
Displays the total accumulated distance you have traveled from zero to 9999 miles. The total
accumulated distance is retained when the meter is turned off.
Displays your pulse rate in beats per minute. To display pulse, select the PULSE MODE and
grasp the pulse sensors on the Desktop, one in each hand. The heart icon will begin flashing
when the ELECTRONIC METER senses your pulse. Your pulse will be displayed approximately
five (5) seconds after the heart icon is displayed. If the heart icon does not appear, relax your
grip or change your grip on the pulse sensors.
FUNCTIONS:
SCAN:
TIME:
SPEED:
DISTANCE:
CALORIES:
ODOMETER:
PULSE:
NOTE:
Pedal movement or press the button.
Automatically shuts off after four minutes of inactivity.
POWER ON :
POWER OFF :
MODE BUTTON:
Press to select display functions, including SCAN, TIME, SPEED,
DISTANCE, CALORIES, ODOMETER, and PULSE.
Press and hold for two seconds to reset all functions to zero, except
ODOMETER .
1. Do not mix a new battery with an old battery.
2. Use the same type of battery. Do not mix an alkaline battery
with another type of battery.
3. Rechargeable batteries are not recommended.
4. Ultimate disposal of battery should be handled according
to all state and federal laws and regulations.
5. Do not dispose of batteries in fire.
NOTE:
1. Refer to illustration 1. Use hand or simple tool to pry the
METER(18) from the DESKTOP(20).
2. The meter operates with two AAA batteries, the batteries
are not included. Refer to the illustration 2 to install or
replace the batteries.
3. Refer to the detail view in illustration 1. Press the
METER
(18)
back to the
DESKTOP(20).
HOW TO INSTALL AND REPLACE BATTERIES:
1. The meter will shut off automatically after four minutes of inactivity. All function values will be
kept. Press the button and hold it down for two seconds to reset all functions to zero, except
ODOMETER .
2. The ODOMETER will be reset to zero after batteries are removed for battery replacement or
storage of the unit.
AAA Batteries
PULSE TIME SPEED CALORIES DISTANCE ODO
MODE
SCAN
1.
2.
Tool