7
2.2.3 Connecting the power cord (Fig.4)
1.
Clockwise rotate the left and right brightness
adjusting switches
①
until the end on (off) state
before connecting the power cord
②
.
2.
Insert the power plug
②
into the power jack of
the microscope; make sure the connection is
well.
3.
Plug the power cord
③
into the power supply
receptacle safely. Make sure the connection is
well.
●
Adjustable illumination for both LEDs (top and
bottom).
●
Input Rating
：
100V
～
240V.
Trinocular head is optional if video or photography
function is needed.
2.2.4
Video(Photography) accessories assembly
1. Installing the video set: Remove the dust cap
of the trinocular viewing tube, revolve the
camera set
⑤
into the screw thread end---the
video adapter
④
with C mount, and insert the
other end into the tri-through port and screw
down the bolt
⑥
.
2. Installing the photography set: Remove the dust
cap of the trinocular viewing tube, install the
photography accessories
⑦
into the tri-through
port, and screw down the locking bolts
⑥
,
change the camera
⑨
gun with digital
photography adapter
⑧
, and insert the adapter
into the accessories, as in Fig 6.
P4
①
③
②
P6
⑥
⑦
⑨
⑧
P5
⑤
⑥
④
