10
12
INSTALLAITON
SAFETY RULES FOR MACHINE LIFTING
1. Pay special attention to the balance of the machine while lifting.
2. Use a forklift with sufficient loading capacity to lift the machine.
3. Have another person help guide the way when lifting the machine.
4. The forks of forklift must protrude from under the machine underside.
5. The forklift must only be driven by an experienced forklift driver.
This is a heavy machine. Serious personal injury may occur if safe moving ethods are not used. To be
safe, get assistance and use power equipment to move the shipping crate and remove the machine from
the crate.
Although not required, we recommend that you mount your new machine to the floor.
Because this is an optional step and floor materials may vary, floor mounting hardware is not
included. Generally, you can either bolt your machine to the floor or mount it on machine
mounts. Both options are described below. Whichever option you choose, it is necessary to
level your machine with a precision level.
SELECTION OF LOCATION
Requirement of operating environment the operating temperature for this machine should be
b5
℃
and +40
℃
,
while the relative humidity should not exceed 50% at a maximum
temperature of +40
℃
.
Improper environment will affect the machine’s safe operation, avoid the following working
area:
Avoid placing in area where the machine will rock or be uneven, thus preventing the machine
from falling or turning over. This will prevent injuries and undue wear on the machine.
Avoid placing in places where vibration may occur. Install the machine at the anticipated
place.
Whether there is any dust on the sliding surface or any defect. Clean it first to avoid setting off
sparks or causing an electrical shock.
Space allocation
Consider the largest size of workpiece that will be processed through this machine and
provide enough space around the machine for adequate operator material handing or the
installation of auxiliary equipment. With permanent installations, leave enough space around
11
FEATURES
Motor – 2HP, Single Phase 110/220 Volts.
Motor Speed –1725 RPM.
Motor Switch –Magetic control panel
Blade Speed –2300 , 3250 FPM.
Fully Balanced Cast Iron Wheels.
Table Size – 16” X 20” .
Table Material – Precision Ground Cast Iron.
Table Tilts – -5°~45°
Floor To Table Height- 36½"
Throat – 14½"
Cutting Height – 12''
Overall Height – 76”
Net Weight – 130 kg
Gross Weight – 165 kg
Packing Size- 75x58x195cm
Содержание CWI-B1512
