Stalgast 725001, Инструкция по эксплуатации

Страница: 9 / 12

- 9 -
EN
4. Loosen D knob, then regulate the distance adjusting board up and down, when the board is closer to the blade, the thickness
of the sausager is thinner. Tighen D knob when the thickness is regulated well (attention must be paid on the blade while regula -
ting the board, in case of injury on hands).
4. ASSEMBLY
4.1. Connection to the power supply
The appliance must be connected to an electrical outlet by means of a plug. The electrical outlet should be earthed and equipped
with a differential current protection device.
4.2. Positioning of the appliance
The appliance should be placed on a level and stable surface. Do not place the appliance on flammable materials. Do not place the
appliance near naked flames, electric ovens, heating stoves or other heat sources.
5. CLEANING AND MAINTENANCE
Every time after completion of work, the parts of the machine must be dismantled and cleaned to ensure food hygiene.
Take special care when cleaning the blades. Risk of injury.
1. It is stritly prohibited to wash various part of the machine with water diretly.
2.
Do not use any abrasive cleaning agent or metal brush to clean the machine.
3. It is pronibited to use gasoline, alcohol, acid and alkali soluble agents to wip on the machine.
4. It is strictly prohibited to clean the machine while it is working.
6. COMMON FAULTS AND SOLUTIONS
This machine must be maintained by the professionals only, non professional personnels shall not repair without authorization, in
case of human injury or mechanical electrical failure on the machine.
Common faults and solutions see chart 2
For any fault not mentioned in the chart, or the listed faults cannot be solved efficiently, please contact the distributor or contact us.
Faults Description Solutions
Machine cannot be started Check if the plug is reliably connected with power, or if the plug is inserted
well.
Sausage cannot be cut, or the slicling is too
thin
The distance adjusting board is too close to the blade. Please regulate the
board according to Chapter 3.
7. DISPOSAL OF THE OLD APPLIANCE
Information for users on the rules concerning proper disposal of electrical and electronic equipment at the end of its
life.