STALEX 388201, Руководство по эксплуатации

Страница: 11 / 25

11
VI.INVERTER PARAMETER:
1
．
Consumers are not allowed to adjust the parameters without authorization .(In case that
machine failure is caused by any consumer who alters any parameter without authorization,
the consumer should be responsible for the failure.)
2.Inverter parameters are only provided for the qualified technician.
MAINTENANCE AND CAUTIONS
Remarks:
1.
This welding device isn’t recommended to weld saw blades made of high speed steel.
Continuous welding should be avoided. After being used several times, turn the welder
off for 15 minutes rest so that the transformer will not suffer from overheat. In case that
transformer becomes overheated, the temperature controller will actuate the breaker.
Reuse will not be allowed until the transformer cools down.