B. By Pocket Master I or Foot Master I
The easy remote control is used only in master/slave mode. By connecting to the 1/4”
microphone jack of the first unit, you will find that the remote control on the first unit will control
all the other units for Stand by, Function/Mode.
5. How To Control The Unit
You can operate the unit in three ways:
A. By master/slave preprogrammed function
By linking the units in master/slave connection, the first unit will control the other
units to give an automatic activated synchronized light show. In this mode, the
first unit(master)dipswitch 10 must be on. This function is good when you want an
instant show. You will know which unit is the master because its DMX input jack
will have nothing plugged into it and its red LED will flash to the music. The other
units (slaves) will have DMX cables plugged into the DMX input jacks (daisy chain)
and the red LED lights will be constantly flashing. Please refer to the diagram on
setting the dipswitches.
Unit
DIP Swi tch Setting
Master
Slave 1
Slave 2
Slave 3
Stand by
Strobe
1. Color selection
Dimmer
Function
1. Full on strobe
2. Full on (hold 3 sec.
2. Two-light strobe
for full on colors)
Mode
Sound (LED off)
Manual (LED on)
Latch (LED blinking)
Blackout the unit (fade out in 5 sec.)
e
n
g
lis
h
Foot Master I
For pre-programmed light shows
