Stairville DMX-Master 3-FX, Руководство пользователя

Страница: 34 / 52

To turn off the inversion for all DMX channels, proceed as follows:
1.
To enter ‘Setup Mode’, keep [Program] pressed for three seconds.
2.
Use | [Up] or | [Down] to select the option ‘Invert’ .
3.
Select all [Fixture] buttons to be able to remove the inversion on all devices.
4.
Press [Delete] .
ð
All LEDs will flash three times briefly.
5.
To return to ‘Play Mode’, keep [Setup] pressed for three seconds.
8.9 Assigning the jog wheels Pan and Tilt for rotation and inclination
You can assign both jog wheels [Pan] and [Tilt] for each connected DMX device to
one of 16 DMX channels. Thus the two jog wheels serve as additional controls in
addition to the sliders. The settings that you make with the jog wheel form the basis
for the values generated by the effects generator for rotation and inclination.
The assignment of the jog wheels to DMX channels may be different for the various
connected DMX devices, for example, channel 1 and 2 at DMX unit #1 and channel 5
and 6 at DMX unit #2. Nevertheless, you can use the jog wheels for both DMX
devices.
After deleting the device memory, the jog wheels for all DMX devices are assigned to
channels 1 and 2 ( Ä ‘Initializing device memory’ on page 43 ).
To assign DMX channels to both jog wheels [Pan] and [Tilt] for rotation and inclina‐
tion, proceed as follows:
1.
To enter ‘Setup Mode’, keep [Setup] pressed for three seconds.
2.
Choose ‘Pan’ or ‘Tilt’ .
3.
Press die [Fixture] buttons of those DMX devices that you want to be affected
by the changes.
4. Use the [Scene] buttons to assign a rotation or inclination channel The display
shows either ‘Channel pan XY’ (channel xy is being assigned to jog wheel
[Pan] ) or ‘Channel Tilt XY’ ( channel xy is being assigned to jog wheel [Tilt] ).
5. Use [PAGE] to switch between channels 1…8 and 9…16.
6. If necessary, repeat steps 2 to 5 for further DMX devices connected.
7. Press [Record] to save, otherwise your changes are currently effective, but
won't be applied permanently, though.
ð
The LED flashes three times briefly.
8.
To return to ‘Play Mode’, keep [Setup] pressed for three seconds.
Turning off inversion for all channels
Configuring jog wheels
Instructions for use
DMX controller
34