Stairville DMX-Master 3-FX, Руководство пользователя

Страница: 32 / 52

1.
To enter ‘Program Mode’, keep [Program] pressed for three seconds.
2.
Press [FX Editor] .
ð
The LEDs of the buttons light up.
3.
Press die [Fixture] buttons of those DMX devices that you want to be affected
by the changes.
4. Press the effect button of the effect that you want to change.
5. Use the sliders [FX Speed] and [FX Size] to adjust speed and size of the effect.
Use | [Up] or | [Down] to change the default angle for rotation and tilt in
steps of 45° (see Ä ‘Wave motion with the ‘Create Wave’ button’ on page 30 and
Ä ‘Random function with the ‘Randomize’ button’ on page 30 ).
6. To save this movement press [RECORD] and select one of the six overlay
scenes.
ð
All LEDs will flash three times briefly.
7.
To return to ‘Play Mode’, keep [Program] pressed for three seconds.
8.7 Cross-fades
With the help of the cross-fade function, it is possible to set DMX channels that are
driven slowly and evenly up or down to a target value upon changes. This device
generates the necessary intermediate steps automatically.
Cross-fades are useful only for movements and dimmer settings. Therefore, it is pos‐
sible with this function to define, which channels are affected and which are not.
To set up the cross-fade for a DMX channel, proceed as follows:
1. To enter ‘Setup Mode’, keep [Program] pressed for three seconds.
2.
Use | [Up] or | [Down] to select the option ‘Fadetime’ . Now you can change
the channels for cross-fades.
3.
Press die [Fixture] buttons of those DMX devices that you want to be affected
by the changes.
4. Activate or deactivate channels via the [Scene] buttons. The display shows
either ‘CHxx: ON’ (the cross-fade will be assigned to channel xx) or ‘CHxx: OFF’
(channel xx is not affected by the cross-fade).
5. Use [PAGE] to switch between channels 1…8 and 9…16.
6. If necessary, repeat steps 3 to 5 for further DMX devices connected.
7. Press [Record] to save, otherwise your changes are currently effective, but
won't be applied permanently, though.
8.
To return to ‘Play Mode’, keep [Setup] pressed for three seconds.
9.
Use the slider [Fade Time] to set the cross-fade time.
Saving an effect in an overlay scene
Setting up and storing channels for
cross-fades
Instructions for use
DMX controller
32