Page 16
With durable, high performance components, this equipment is designed for heavy usage with minimal maintenance
required. To keep it in top condition, perform regular daily, weekly and monthly preventive maintenance routines out-
lined below.
WARNING: The safety and integrity of this machine can only be maintained when the equipment is regularly ex-
amined for damage and wear and repaired. It is the sole responsibility of the owner of this equipment to ensure that
regular maintenance is performed. Worn or damaged parts must be replaced immediately or the equipment removed
from service until the repair is made.
MAINTENANCE SCHEDULE
Daily
Weekly
Monthly Bi-Annually
General Maintenance
Oil Chain
1
X
Inspect Chain
X
Tighten Slack Cord if Needed
2
X
Check Handle Connection
X
Check Screws for Tightness
X
Check Console Arm Joints, loosen or tighten as needed
X
Cleaning
Wipe Down all Surfaces
X
Vacuum under Unit
X
Clean and Vacuum inside Flywheel
X
1 - Lubricate the chain with a teaspoon of purified mineral oil, 3-IN-ONE® oil, or 20W motor oil. Apply oil to a paper towel, and rub the paper towel along entire length of
chain. Wipe off the excess. Repeat if needed. Do not clean the chain with any kind of cleaner or solvent, e.g. WD-40®.
2 - See BUNGEE INSTALLATION on page 17
INSPECTION
Inspect the frame for any rust, bubbling, or paint chips during the daily cleaning. The salt in perspiration can damage
the unpainted surfaces. Repair the damaged area with a touch-up paint kit purchased from
Core Health & Fitness (call Customer Service for order information).
