Stairmaster Air Fit, Руководство пользователя

Страница: 25 / 32

Maintenance
This section provides the procedures to maintain the Air Fit™ in serviceable condition.
Moving & Leveling
To move the bike to a new location:
Lift the bike from the rear and use the front wheels (located on the front leg, below the handlebar) to roll the bike from one location to another.
To level the bike:
Use the four leveling adjusters (located on the underside of the front and rear legs) to compensate for uneven floor surfaces.
Preventive Maintenance
Perform regular scheduled preventive maintenance procedures to maintain your Air Fit™ indoor cycling bike in serviceable condition.
TE
Daily Maintenance
The life of your Air Fit™ product will be determined by how consistently you perform the daily maintenance procedures. Dry the Air Fit™ bike after each use to
remove sweat and moisture. It is best to use a liquid non-abrasive cleaner diluted with water.
Wipe Down / Cleaning
To prevent the build-up of rust and other forms of corrosion, wipe down the bike at the end of each day (or preferably at the end of each class). Raise all posts to the
highest setting to expose moisture. Using an absorbent cloth, focus on all areas that perspiration can settle. Give particular attention to the following areas:
•
Handlebar
•
Seat / adjustable slide for the seat
•
Flywheel
•
Back leg assembly
•
Belt guard
•
Brake knob and bolt assembly
•
Pop-pins
•
Leveling feet
NOTE:
Never use abrasive cleaning liquids or petroleum-based solvents when wiping down the bike.
Owner’s Manual
25