47
6. Finally, do a thorough test again.
Proceed as described under
„Checking the accuracy of the cut-out
value“.
7. Replace the plastic handle or plugs
as appropriate to protect the cut-out
mechanism against dirt and damp.
Replacement plugs are available from
STAHLWILLE.
Cleaning the
Manoskop
®
Please use only white spirit. Other
chemical substances may damage the
plastic components.
ã
C A U T I O N !
Important! If you cannot
compensate for the
deviation within the
prescribed tolerances
using the method
described here, it is
likely that the cut-out
mechanism is damaged.
Such defects can only be
repaired if the torque
wrench is dismantled.
Contact STAHLWILLE in
such cases.
