36
Attaching insert tools - 730/2
to 730/65
1. Insert the insert
tool into the
internal square
drive on the
face of the
head of the
wrench. The
spring-loaded
locking pin of the insert tool will be
pressed down by the insertion
groove. Slide the insert tool in until it
comes to the endstop. Ensure the
locking pin locates in the hole.
2. Check to see that the insert tool is
properly attached.
3. To tighten counter clockwise, turn the
insert tool through 180° before
attaching to the torque wrench.
4. If you are using
a ratchet insert
tool, set this to
the desired
direction by
turning the
control knob.
Removing insert tools
730/2 and 730/4
1. Insert a fine
punch into the
locating hole of
the shell tool
from outside.
Use the punch
to depress the
locking pin.
2. Remove the insert tool.
