Mounting and installation
12
243206 / 857360300020
2016-11-10·BA00·III·en·00
SolConeX extra-low voltage wall-mounting socket
Series 8573/13
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
15727E00
• Loosen the cap nut (6).
• Remove dust protection (5).
• Optional: Remove reduction sealing
insert (4b).
• Guide the cable through the cable
entry.
• Tighten the cap nut (6).
Legend
2
= sealing ring
4b = Reduction sealing insert (RSI)
3
= connection thread
5
= dust protection
4a = Sealing insert
6
= Cap nut
Dimensions [mm]
A
B
Main contacts
180
10
11201E00
• Open the enclosure.
• Guide the cables through the cable
entry into the connection chamber.
• Strip the cables.
• Insert the conductors into the
corresponding terminals and clamp
them (for tightening torque, see
chapter "Technical data"). Insert the
stripped cable ends completely
under the terminal.
• Check if the conductors have been
clamped properly.
• Align the conductors. Make sure
that the clamping points are not
under tension.
• Tighten the cable entry/entries.
• Close the enclosure (for the
tightening torque, see chapter
"Technical data").
