Technical data
8
243206 / 857360300020
2016-11-10·BA00·III·en·00
SolConeX extra-low voltage wall-mounting socket
Series 8573/13
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
For further technical data, see www.stahl-ex.com.
Mechanical data
Number of poles
2 P / 3 P
Enclosure material
Polyamide, glass fibre reinforced
Degree of protection IP66 acc. to IEC/EN 60529
Connection type
Screw terminals
Connection cross-
section
Weight
0.300 kg
Service life
> 5,000 switching cycles (electrical and mechanical) acc. to IEC/EN 60309-1
Tightening torque
Terminals: 1.2 Nm
Connection chamber cover of the wall-mounting socket: max. 1.8 Nm
Cable entries
Cable gland
1 x M25x1.5 on bottom
(acc. to order, positioning on the top or at the side also possible)
Optional: on the top max. 2 x M25x1.5; also available with stopping plug
or metallic entries
* Reduction sealing insert
1)
max. clamping range depending on expansion adapter used (smaller if
applicable)
Stopping plug
1 x M25x1.5
When used in an application range of < -40 °C, the seal is only intended for
a one-time installation. Replace the seal before mounting it again.
Technical Data
solid
1 x 0.75 mm
2
... 2 x 4 mm
2
finely stranded
1 x 0.75 mm
2
... 2 x 4 mm
2
finely stranded with core end sleeve 1 x 0.75 mm
2
... 2 x 4 mm
2
Thread
size
A/F
Clamping
range
Clamping
range +
RDE*
Tightening
torque
Connection
thread
at 20 °C
Tightening
torque
Cap nut
at 20 °C
M20x1.5
24
7 to 13 mm
4 to 8 mm
2.3 Nm
1.5 Nm
M25x1.5
29
10 to 17 mm
7 to 12 mm 3 Nm
2 Nm
Thread size
A/F
Tightening torque
Connection thread
at 20 °C
M20x1.5
24
1 Nm
M25x1.5
29
1.5 Nm
M32x1.5
36
2.5 Nm
