Stahl SolConeX 8571/11 Series, Руководство по эксплуатации

Страница: 13 / 16

150942 / 8571601300
2014-01-21·BA00·III·en·08
Commissioning
13
SolConeX Wall-Mounted Socket, 32 A
Series 8571/11
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
8 Commissioning
Before commissioning, ensure the following:
• Check the mounting and installation.
• Inspect the enclosure for damage.
• If necessary, remove foreign bodies.
• If necessary, clean the connection chamber.
• Check whether the cables have been inserted correctly.
• Check whether all screws and nuts have been tightened firmly.
• Check whether all the cable entries and stopping plugs have been tightened firmly.
• Check whether all conductors have been clamped firmly.
• Observe the line voltage.
• Seal the unused cable entries with plugs certified to Directive 94/9/EC and unused
bores with stopping plugs certified to Directive 94/9/EC.
• Use only in completely mounted state.
9 Operation
Only Type 8571/12 and 8578/12 plugs by R. STAHL may be used.
WARNING
Check the device before commissioning!
Explosion protection is impaired!
• Observe the inspection requirements in the current national
regulations before commissioning in order to maintain the
explosion protection.
• Check the device for proper installation and function before
commissioning.
Switching on and off has to be performed quickly and completely.
Avoid switching positions between 0 and I (ON and OFF).
The wall-mounting socket may only be operated when fully mounted.
The wall-mounting socket can be switched only with the inserted plug.
If the plug has been disconnected, close the hinged cover with the bayonet
ring.