Stahl SolConeX 8571/11 Series, Руководство по эксплуатации

Страница: 12 / 16

Mounting and Installation
12
150942 / 8571601300
2014-01-21·BA00·III·en·08
SolConeX Wall-Mounted Socket, 32 A
Series 8571/11
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Installation of auxiliary contacts
Dimensions [mm]
A B
Main contacts 200 12
Auxiliary contacts 200 6
Ex i auxiliary
contacts
20 6
• Open the enclosure.
• Lead the cable through the cable
gland into the connection chamber.
• Insert the conductors in the
corresponding terminals and clamp
them (for tightening torque,
see chapter "Technical data").
The stripped cable ends must be
fully underneath the clamping plate.
• Check if the conductors are
clamped properly.
• Align the conductors (the clamping
units must not be under tension).
• Tighten the cable gland(s).
• Close the enclosure.
For the tightening torque,
see chapter "Technical data".
16027E00
• Open the enclosure.
• Lead the cable through the cable
gland into the connection chamber.
• Unlock the screwless type terminals
by means of a screwdriver (2)
(cutting edge 06 x 3.5 form A
according to DIN 5264 or
ISO 2380-1).
• Insert the conductors in the
corresponding screwless type
terminals and clamp them (3).
The stripped conductor ends must
be fully inside the terminal.
• Align the conductors (the clamping
units must not be under tension).
• Tighten the cable gland(s).
• Close the enclosure.
For the tightening torque,
see chapter "Technical data".
11202E00