Operating Instructions
english
12
Transmitter Supply Unit Type 9160
1
General information
1.1
Manufacturer
1.2 Information regarding the operating instruction
ID-Nr.:
9160617310
Pub-Nr.:
S-BA-9160-001-de/en-11/2012
HW-revision
F
2
Symbols used
3 Safety instructions
The most important safety instructions are summarised in this chapter. It is intended to
supplement the relevant regulations which must be studied by the personnel responsible.
When working in hazardous areas, the safety of personnel and plant depends on
complying with all relevant safety regulations. Assembly and maintenance staff working on
installations therefore have a particular responsibility. The precondition for this is an
accurate knowledge of the applicable regulations and provisions.
When installing and operating the device, the following are to be observed:
For
SIL applications please observe the FMEDA report “SIL STAHL 05/08-34 R008” and
the safety manual.
The apparatus may be installed in Zone 2, Zone 22 or outside the explosion hazard
areas.
If installed in Zone 2 or Zone 22, the apparatus is to be fitted in an enclosure that meets
the requirements of IEC/EN 60079-15.
R. STAHL Schaltgeräte GmbH
Phone:
+49 7942 943-0
Am Bahnhof 30
Fax:
+49 7942 943-4333
74638 Waldenburg
Internet: www.stahl.de
Germany
!
Danger
c
The device complies with the applicable EC standards.
e
Electric circuits for hazardous locations.
Input
Output
Information sign: Provides a note or recommendation.
