Stahl MT 7 Series, Руководство по эксплуатации

Страница: 42 / 44

Operating Instructions MT-xx7 Release notes
Page 42 of 44

R. STAHL HMI Systems GmbH / OI_MT_xx7_en_V_01_02_14.docx / 06.12.2019
19 Release notes
The chapter entitled "Release Notes" contains all the changes made in every version of the
operating instructions.
Version 01.02.11

Removal of previous release notes

Changing disclaimer

Changing section "Processor types" with "complementary AMD processor" at 577

Deleting HW-Rev 01.01.04 at 4x7 on cover

Addition of information on "HMI types" in "Technical data"

Addition of "Technical Data" for data memory at 5x7, staring from HW rev 01.01.01

Deleting of section HW-Rev 01.01.04 with 4x7 and 5x7 in "Technical Data"

Addition of section "MT-577-2TX-P2" with HW-Rev 01.01.04 in "Technical Data"

Changing conformity to standards, with changing of low voltage directive

Deleting of "Type code" for MT-4x7-*-P2

Changing of "Type code" for MT-5x7-*-P2 into MT-577-2TX-P2

Addition of version 128 GB at Thin Client MT-5x7-*-BT

Addition of "Text box Attention" in section "General safety information" with information on
"Gap between touch surface and cover"

Addition of section "Connections" with TX interface for MT-577-2TX-P2 device only

Addition of section "Connections" FO interface not for MT-577-2TX-P2 device

Addition of text in "Textbox Notice" in section "Connections" with information according to
MT-577-2TX-P2 device

Changing title "Maintenance" into "Maintenance, overhaul"

Addition of "textbox caution" in section "Maintenance, overhaul" with information
according to "decommission the device"

Addition of text in "Textbox Notice" in section "Recovery Stick" with info on "intrinsically
safe recovery stick not at xx7 interfaces"

Addition of RCM declaration of conformity

Formal changes
Version 01.02.12

Changing of text for HW rev. 01.01.04 in section "Processor types"

Changing of "Technical Data" in relation to P2 versions

Changing of section "Type code" MT-577-*-P2

Changing of table "Connections", for 2TX in relation to P2 versions

Changing of text in "Textbox Notice" in section "Connections" in relation to P2 versions

Addition of text "unused wires must be isolated" in "Textbox Notice" in section
"Connections"

Formal changes
Version 01.02.13

Renew CNEX certification
Version 01.02.14

Addition of section "Touch driver"

Removal of notice in section "General Information"