Stahl MT 7 Series, Руководство по эксплуатации

Страница: 14 / 44

Operating Instructions MT-xx7 Certificates
Page 14 of 44

R. STAHL HMI Systems GmbH / OI_MT_xx7_en_V_01_02_14.docx / 06.12.2019
5 Certificates
The MT-xx7 HMI devices are certified for installation in the following areas:
Europe:
according to ATEX Directive
for installation in zones 2 and 22
International / Australia:
IECEx (International Electrotechnical Commision System for Certification to
Standards for Electrical Equipment for Explosive Atmospheres)
Russia / Kazakhstan / Belarus:
EAC (TR) (Technical Regulation of the Eurasian Customs Union)
China:
according to CNEX
carried out by:
CQST (China National Quality Supervision and Test Centre for Explosion Protected
Electrical Products)
Marine certification:
DNV / GL (Det Norske Veritas / Germanischer Lloyd)
5.1 ATEX
The ATEX certificates are listed under the following certification numbers:
Certificate number for MT-xx7: BVS 12 ATEX E 033 X
5.2 IECEx
The IECEx certification is listed under the following certificate number:
Certificate number: IECEx BVS 14.0034X
You can access all IECEx certificates on the official
website of the IEC under their certificate number.
http://iecex.iec.ch/iecex/iecexweb.nsf/welcome?openform .
5.3 EAC (TR)
The EAC (TR) certificate is listed under the following certificate number:
Certificate number: TC RU C-DE.
ГБ04.B00478
5.4 CNEX
The CNEX certification is listed under the following certificate number:
Certificate number:
CNEx19.3885X
DOCUMENTATION