Stahl ISpac 9193/21-11-11, Руководство по эксплуатации

Страница: 25 / 41

169070 / 9193603310
2019-0 7 - 16 ·BA00·III·en·0 1
Safety
5
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Supply Module
Type 9193/21-11-11
3 Safety
The device has been manufactured to the state of the art while observing recognised
safety-related rules. When using the device, it is nevertheless possible for hazards to occur
to life and limb of the user or third parties or for the device, environment or material assets to
be compromised.

Use the device only
- if it is not damaged
- as intended, while remaining aware of safety and dangers
- in accordance with these operating instructions.
3.1 Intended Use
The supply module type 9193/21-11-11 is an accessory for the ISpac 91xx (17.6 mm width)
and 92xx (12.5 mm width) product series. If installed in series with the pac-Bus elements
9194 and 9294, the supply module (with its special pac-Bus elements, grey colour) enables
a redundant auxiliary power supply (24 V DC, max. 4 A) for all ISpac devices installed on this
pac-Bus segment. Furthermore, the supply module generates a collective error message.
The device may only be operated in environments not exceeding degree of pollution 2.
"Intended use" includes complying with these operating instructions and the other applicable
documents, e.g. the data sheet.
Any other use is not intended.
3.2 Personnel Qualification
Qualified specialist personnel are required to perform the activities described in these
operating instructions. This primarily applies to work in the following areas:
• Product selection, project engineering
• Mounting/dismounting the device
• Installation
• Commissioning
• Maintenance, repair, cleaning
Specialists who perform these tasks must have a level of knowledge that meets applicable
national standards and regulations.
Additional knowledge is required for tasks in hazardous areas! R. STAHL recommends
having a level of knowledge equal to that described in the following standards:
• IEC/EN 60079-14 (Electrical installations design, selection and erection)
• IEC/EN 60079-17 (Inspection and maintenance of electrical installations)
• IEC/EN 60079-19 (Equipment repair, overhaul and reclamation)