Mounting and Installation
22
9182602330
2018-03-16·HB00·III·en·02
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Temperature transmitter Ex i
Series 9182
8.2.2 Mounting / Dismounting of the Device on Top Hat Rail and pac-Bus
Mounting on Top Hat Rail
Mounting on pac-Bus
Dismounting
06886E00
• Position the device on the top hat rail.
Position the cut-out of the enclosure on the outside edge
of the top hat rail.
• Engage the device on the top hat rail.
• When swivelling the device onto the top hat rail,
make sure that it is not set at an angle.
15554E00
The pac-Bus is equipped with a polarisation guide and the
device with a matching slot.
• Position the device as shown in the illustration.
Position the cut-out of the enclosure on the outside edge
of the top hat rail.
• Engage the device on the pac-Bus.
06881E00
• Pull out the base bolt somewhat using a screwdriver.
• Swivel out the device.