Mounting and Installation
16
914660330020
2017-11-24·HB00·III·en·00
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Frequency Transmitter
Field Circuit Ex i
Series 9146
8.2.4 Mounting / Dismounting pluggable Terminals
Mounting
• Plug the terminal into the device until the terminal engages.
Dismounting
8.3
Installation
8.3.1 Electrical Connections
10859E00
• Position the screwdriver behind the terminal.
• Push out the terminal.
Operation under difficult conditions, such as, in particular, on ships, requires
additional measures to be taken for correct installation, depending on the
place of use. Further information and instructions on this can be obtained
from your regional sales contact on request.
DANGER
Explosion hazard caused by too high voltage!
Non-compliance results in severe or fatal injuries.
• Connect the device only to equipment with internal voltage
U
m
: max. 253 V AC / 50 Hz.
• Connect the device only to intrinsically safe terminals.
DANGER
Explosion hazard due to incorrect safety characteristic values of the
device or connected field devices!
Non-compliance results in severe or fatal injuries.
• Check safety characteristic values of the device and connected
field devices according to the national installation guidelines.
