Stahl is1+ 9441 Series, Руководство по эксплуатации

Страница: 73 / 92

169128 / 944160310050
2020-08-25·BA00·III·en·08
Parameterization and Commissioning
31
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Ethernet CPU module and
power module for Zone 1/Class I, Div.1
Series 9441, Series 9444, Series 9492
6.1.6 Display Diagnostic Data for the Ethernet Switch
For diagnostics, the following MIB counter registers can be displayed for port 5
(Ethernet CPU module) and port 4 (fibre optic host connection):
LCD display Settings
12309E00

Press the [Enter] key twice to switch from the system level to the
information/service level.
The following display appears (shown on the left).
12319E00

Press the ◄ or ► key until the following display appears
(shown on the left).
12325E00

Press the [Enter] key.
The following display appears (shown on the left).
12326E00

Press the ◄ or ► key to select a port.
The following display appears (shown on the left).

Press the ◄ or ► key to switch between the different tabs.

Press the [ESC] key to leave the sub-menu.
0x0B RxBroadcast Rx good broadcast packets
(Not included: Errored broadcast packets or
valid multicast packets)
0x0C RxMulticast Rx good multicast packets
(Not included: MAC control frames,
errored multicast packets or valid broadcast packets)
0x0D RxUnicast Rx good unicast packets
0x12 Rx512to1023Octets Total Rx packets (bad packets included)
with a length of 512 to 1023 octets
0x18 TxBroadcastPkts Tx good broadcast packets
(Not included: Errored broadcast or
valid multicast packets)
0x19 TxMulticastPkts Tx good multicast packets
(Not included: Errored multicast or
valid broadcast packets)
0x1A TxUnicastPkts Tx good unicast packets
CPU 0-0: Status
NoDataExch
CPU 0-0:Switch
< >
MIB Cntr Port 4
< >
MIB Cntr Port 5
Reg 0B->00000000