162278 / 9440609310
2020-10-22·BA00·III·en·08
Parameterization and Commissioning
23
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
CPU & power module
for Zone 2/Class I, Div. 2
Series 9440/15
9.1.2 Start-Up
9.1.3 Setting the Fieldbus Address
Display
Settings
12258E00
• After connecting the auxiliary power, the device will boot.
• After successful completion of the booting process, the LCD display
switches to the system level (shown on the left).
The fieldbus address can be set only if the device is not in the
Data Exchange mode.
Display
Settings
12258E00
• Initial display (shown on the left)
12259E00
• Press the
▲
and
▼
buttons simultaneously. The following display appears
(shown on the left).
12260E00
• Press the
▲
and
▼
buttons simultaneously. The following display appears
(shown on the left).
12261E00
• Press the
▲
and
▼
buttons simultaneously. The following display appears
(shown on the left).
• Press the
▲
or
▼
button until the desired fieldbus address has been set.
Pressing and holding the button changes the value quickly.
The adjustment range goes from 0 to 127.
12262E00
• Press the
▲
and
▼
buttons simultaneously. The following display appears
(shown on the left).
12263E00
• Press the
▲
and
▼
buttons simultaneously. The user adjustments are
applied. The device boots again.
or
• Press the
▲
or
▼
button. The following display appears (shown on the left).
• Press the
▲
and
▼
buttons simultaneously. The user adjustment is
cancelled.
After setting the fieldbus address, the device boots again.
The fieldbus address is permanently saved and is also available after reset or
recommissioning.
FBAdr
FB
I/O
120
OK
OK
FBAdr
FB
I/O
120
OK
OK
CPM
active
9440/15-01-11
CPM
active
FB addr :
5
set FB address
select:
5
accept changes ?
yes -> CPM reset
accept changes ?
No
