Stahl IBPC-5x1, Руководство по эксплуатации

Страница: 19 / 24

Operating Instructions Industrial Box PC System modifications

R. STAHL HMI Systems GmbH / OI_Industrial_Box_PC_en_V_01_00_00.docx / 26.09.2018 Page 19 of 24
11.2 Opening the enclosure

Switch off the Box PC. The Box PC must not be in energy saving mode.

Unplug the device from the mains.

Only plug the device back into the mains after the enclosure has been closed again.

Carefully open the enclosure, because there are electrical lines from the enclosure lid to
the system which may rip.

Remove any plugged lines that are in the way.

Remove the screws on the back (1).

Slide the enclosure lid in the direction of the arrow (2) and swing the lid open towards
the front (3).
11.3 Closing the enclosure

Place the lid back onto the enclosure and slide it towards the back.

Fix the lid at the back of the Box PC with both screws.

Make sure no lines are trapped between enclosure and components.

Replug all lines you unplugged before.