223845 / FL6060300010
2018-04-13·BA00·III·en·01
Mounting and installation
15
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Explosion Proof Visual Signal -
5, 10 or 20 Joule
Series FL60
7.2.5 Earth connection
• The unit must be connected to a good quality earth.
• The internal Earth connection is the primary point. The external connection is for a
supplementary bonding connection and is used where local code or authorities permit
or require such connection.
7.3
Installation
15265E00
WARNING
Danger of electric shock due to energised parts!
Non-compliance can result in severe or fatal injuries.
• All connections and wiring must be disconnected from the power supply.
• Secure the connections against unauthorized switching.
DANGER
Risk of explosion!
Risk of injuries and material damage!
• Operate the device only if it is not damaged.
• If the thread is damaged, the device must be replaced immediately.
• Take extreme care when handling the device and internal components.
• Particular care is needed when accessing the PCB for installation.
• Exposed joint surfaces must be protected and not have contact with
dust or dirt, or be knocked against any object.
• The end flanges must be fitted squarely and on no account is force to be
used.
• The flange must not be hammered, levered with a metal instrument or
the fixing screws used to pull down the flange.
• With care and patience, it will be found that the flange enters the body
without difficulty.
• Install the device only in a clean and dry operating environment.
Check the following:
• Do you have the correct device to satisfy the system specification?
• Are the gas group and temperature range of the product suitable for the
intended application?
• Is the supply voltage correct?
• Is the strobe the correct colour?
• Is a suitable mounting location available?
