Function and device design
6
223845 / FL6060300010
2018-04-13·BA00·III·en·01
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Explosion Proof Visual Signal -
5, 10 or 20 Joule
Series FL60
3.3
Modifications and alterations
4
Function and device design
4.1
Function
The explosion proof visual signal series FL60 provides a flashing visual signal intended
to alert, warn or draw attention to an event. It has been designed for use in hazardous
and/or harsh environments. In hazardous areas the devices have explosion protection
for ATEX / IECEx zones 1 + 2 for gas and 21 + 22 for dust. The device is suitable for
Gas groups IIB or IIB + H2, Dust group IIIC. UL certified variants offer protection to
Class 1 Division 1 Gas groups BDC, Class II Division I Gas groups EFG.
The device is not intended for continuos use.
The life of the xenon flash tube is guaranteed for the following number of flashes:
DANGER
Explosion hazard due to modifications and alterations to the device!
Non-compliance results in severe or fatal injuries.
• Do not modify or alter the device.
No liability or warranty for damage resulting from modifications and
alterations.
DANGER
Explosion hazard due to improper use!
Non-compliance results in severe or fatal injuries.
• Use the device only according to the operating conditions described in
these operating instructions.
Variant
Number of flashes
5 J
2 million
10 J
5 million
20 J
4 million
