Stahl EXLUX 6409/1 Series, Руководство по эксплуатации

Страница: 32 / 34

Maintenance and repair
32
260520 / 640960300090
2018-11-08·BA00·III·en·02
Emergency Luminaire with LED
Series EXLUX 6409/1
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
11.1.3 Troubleshooting
Refer to the following troubleshooting chart during troubleshooting:
The LED indicator lights up in green after troubleshooting.
If the error cannot be eliminated using the mentioned procedures:
• Contact R. STAHL Schaltgeräte GmbH.
For fast processing, have the following information ready:
• Type and serial number of the device
• Purchase information
• Error description
• Intended use (in particular input / output wiring)
11.1.4 Cleaning
• Clean the device only with a damp cloth.
• Use water or mild cleaning agents.
• Do not use abrasive, scratching and aggressive detergents or solvents.
• Never clean the device with a strong water jet, e.g. using a high-pressure washer!
Cause of error Troubleshooting
The LEDs are defective. Replace the mounting plate including LED
and the control gear.
The control gear is defective. Replace the mounting plate including
LEDs and the control gear.
The switch is defective. Replace the switch.
Red LED indicator
The battery is defective.
Replace the battery.
The switch in the battery box is defective. Replace the switch.
The switch in the luminaire is defective.
Replace the switch.
LED indicator blinking red
The battery capacity is too low.
Replace the battery.
The LEDs are defective. Replace the mounting plate including LED
and the control gear.
NOTE
The luminaire is marked with the warning "Clean with damp cloth only".