Stahl EXLUX 6409/1 Series, Руководство по эксплуатации

Страница: 26 / 34

Operation
26
260520 / 640960300090
2018-11-08·BA00·III·en·02
Emergency Luminaire with LED
Series EXLUX 6409/1
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
10 Operation
10.1 Operating Modes
Power supply operation
Emergency light operation:
In the event of a power failure, the luminaire switches to emergency light operation.
The luminaire is switched on regardless of the operation mode of the selected rated op
-
erating time.
Rated operating time
is 1.5 h or 3.0 h within the optimum temperature range depending on the variant (see
chapter "Technical data").
Emergency light blocking
A remote switch for emergency light blocking can be connected to terminals „Remote-
switch“ of the control gear.
10.2 Functional and rated operating time test
To carry out the test, the following prerequisites must be fulfilled:
• the time interval has expired.
• the power supply operation was active for at least 1 hour.
• the remote switch is closed.
The test result is shown on the LED indicator.
During a test the luminaire is switched on.
Function test
• starts within 24 hours after commissioning.
• is carried out every 7 days.
Stand-by operation The luminaire is switched off regardless of normal lighting.
Continuous operation The luminaire is switched on regardless of normal lighting.
Normal lighting operation The light fitting is operated by normal lighting.
19192E00
Remote switch is closed Remote switch is opened
Power supply
operation
Switching on the luminaire de
-
pending on operation mode
Switching on the luminaire de
-
pending on operation mode
Power failure Emergency light function No emergency light function