Cleaning
18
226834 / 972160310010
2017-06-02·BA00·III·en·02
Media Converter FX op is / TX SC for Zone 2
Series 9721/13-11-xx
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
11.3 Repair
11.4 Returning the device
Only return or package the devices after consulting R. STAHL!
Contact the responsible representative at R. STAHL for this.
R. STAHL's customer service is available to handle returns if repair or service is required.
Contact customer service personally.
or
Go to the www.stahl.com website.
Select "Downloads" > Customer service > "RMA Request".
Fill out the form.
Wait for confirmation. R. STAHL's customer service will contact you.
You will receive an RMA slip after speaking with customer service.
Send the device along with the RMA slip in the packaging to R. STAHL Schaltgeräte
GmbH (refer to Section 1.1 for the address).
12
Cleaning
• To avoid electrostatic charging, the devices located in potentially explosive areas may
only be cleaned using a damp cloth.
• When cleaning with a damp cloth, use water or mild, non-abrasive, non-scratching
cleaning agents.
• Do not use aggressive detergents or solvents.
13
Disposal
• Observe national and local regulations and statutory regulation regarding disposal.
• Separate materials when sending it for recycling.
• Ensure environmentally friendly disposal of all components according to the statutory
regulations.
DANGER
Explosion hazard due to improper repair!
Non-compliance results in severe or fatal injuries.
• Repair work on the devices must be performed only by R. STAHL
Schaltgeräte GmbH.
Only return or package the devices after contacting and consulting R. STAHL!
