Stahl 9182 Series, Руководство по эксплуатации

Страница: 29 / 38

167450 / 9182603310
2021-12-07·BA00·III·en·06
Mounting and Installation
11
DE
EN
FR
IT
ES
RU
NL
DK
SE
FI
PT
GR
PL
CZ
SK
HU
SL
RO
BG
LV
LT
EE
CH
KR
CN
Temperature transmitter
non-Ex i field circuit
Series 9182
8.2 Mounting/Dismounting, Operating Position
8.2.1 Mounting/Dismounting Pac-Bus
The pac-Bus is an accessory which makes it easier to wire the auxiliary power and read
out the collective error message.
Mounting
Dismounting
• Perform the mounting steps in reverse order.
8.2.2 Mounting/Dismounting the Device on the DIN Rail and Pac-Bus
Mounting on DIN rail
Mounting on pac-Bus
The components for the pac-Bus type 9194 must be ordered separately.
07392E00
07391E00
15551E00
Connect the required
number of pac-Bus
elements.
Engage the pac-Bus
elements on the DIN rail.
Connect the terminal set at
the beginning and at the
end.
06886E00
• Position the device on the DIN rail.
When doing so, position the cut-out in the enclosure on
the outside edge of the DIN rail.
• Engage the device on the DIN rail.
• When swivelling the device onto the DIN rail,
make sure that it is not set at an angle.
15554E00
The pac-Bus is equipped with a polarisation guide and the
device is equipped with a matching polarisation slot.
• Position the device as shown in the image.
When doing so, position the cut-out in the enclosure on
the outside edge of the DIN rail.
• Engage the device on the pac-Bus.