Stahl 9182 Series, Руководство по эксплуатации

Страница: 24 / 38

Safety Notes
6
167450 / 9182603310
2021-12-07·BA00·III·en·06
DE
EN
FR
IT
ES
RU
NL
DK
SE
FI
PT
GR
PL
CZ
SK
HU
SL
RO
BG
LV
LT
EE
CH
KR
CN
Temperature transmitter
non-Ex i field circuit
Series 9182
3.3 Safe Use
Before mounting
• Read and observe the safety notes in these operating instructions!
• Ensure that the contents of these operating instructions are fully understood by the
personnel in charge.
• Use the device in accordance with its intended and approved purpose only.
• Always consult R. STAHL Schaltgeräte GmbH if using the device under operating
conditions which are not covered by the technical data.
• Make sure that the device is not damaged.
• We cannot be held liable for damage to the device caused by incorrect or unauthorised
use or non-compliance with these operating instructions.
For mounting and installation
• Have mounting and installation performed only by qualified and authorised persons
(see chapter "Personnel qualification").
• The device is only to be installed in areas for which it is suited based on its marking.
• During installation and operation, observe the information (characteristic values and
rated operating conditions) on the rating, data and information plates located on the
device.
• Before installation, make sure that the device is not damaged.
• When used in Zone 2, the device is to be installed in a protective enclosure or in a
cabinet that offers a suitable degree of protection in accordance with IEC/EN 60079-0.
Commissioning, maintenance, repair
• Only have commissioning and repairs performed by qualified and authorised persons
(see chapter "Personnel qualification").
• Before commissioning, make sure that the device is not damaged.
• Perform only maintenance work described in these operating instructions.
• Repair work on the devices must be performed only by R. STAHL Schaltgeräte GmbH.
• For SIL applications, observe the safety manual and FMEDA reports.
3.4 Modifications and Alterations
No liability or warranty for damage resulting from modifications and
alterations.