Stahl 9146 Series, Руководство по эксплуатации

Страница: 35 / 42

159896 / 914660310010
2018-09-06·BA00·III·en·0 4
Mounting and Installation
15
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Frequency Transmitter Field Circuit Ex i
Series 9146
8.2.3 Mounting / Dismounting pluggable Terminals
Mounting
• Plug the terminal into the device until the terminal engages.
Dismounting
8.3 Installation
8.3.1 Electrical Connections
8.3.2 Schematic Diagrams
See device labelling.
10859E00
• Position the screwdriver behind the terminal.
• Push out the terminal.
Operation under difficult conditions, such as, in particular, on ships, requires
additional measures to be taken for correct installation, depending on the
place of use. Further information and instructions on this can be obtained
from your regional sales contact on request.
DANGER
Explosion hazard caused by voltage that is too high!
Non-compliance results in severe or fatal injuries.
• Connect the device only to equipment with internal voltage
U
m
: max. 253 V AC / 50 Hz.
DANGER
Explosion hazard due to incorrect safety characteristic values of the
device or connected field devices!
Non-compliance results in severe or fatal injuries.
• Check safety characteristic values of the device and connected
field devices according to the national installation guidelines.