Stahl 8624-1, Руководство по эксплуатации

Страница: 50 / 60

Setting parameters for the control unit
20
167921 / 862460300010
S-BA-8624/1-01-en-30/07/2008
Control unit Ex p
8624/1
9.6 Setting the switchpoint for the minimum pressure
07180E02
Fig. 9-5: Setting the switchpoint for the minimum pressure
X
Select the "Switchpoint min. pressure?" display by turning the selector switch by
means of a screwdriver.
X
Press the "Info/OK" key to confirm the selection.
X
Select the desired value by turning the selector switch.
X
Press the "Info/OK" key to confirm the value.
Z
A request for confirming the value again is prompted.
X
Press the "Info/OK" key to confirm the value again.
Z
The display switches back to "Switchpoint min. pressure?".
Z
The desired parameter is set.
9.7 Setting the switchpoint for the maximum pressure
07181E02
Fig. 9-6: Setting the switchpoint for the maximum pressure
X
Select the "Switchpoint overpressure?" display by turning the selector switch by
means of a screwdriver.
X
Press the "Info/OK" key to confirm the selection.
X
Select the desired value by turning the selector switch.
X
Press the "Info/OK" key to confirm the value.
Z
A request for confirming the value again is prompted.
X
Press the "Info/OK" key to confirm the value again.
Z
The display switches back to "Switchpoint overpressure?".
Z
The desired parameter is set.
)
Possible adjustment range: 0.8 mbar - 25.0 mbar.
Factory settings: 0.8 mbar
)
Possible adjustment range: 0.8 mbar - 25.0 mbar.
Factory settings: 15.0 mbar
OK
switchpoint
min. pressure
xxxxx mbar
switchpoint
min. pressure
?
confirm
min. pressure
xxxxx mbar
OK
+
1mbar/step
0,05mbar/step
OK OK
OK
Switchpoint
overpressure
xxxxx mbar
Switchpoint
overpressure
?
confirm
overpressure
xxxxx mbar
OK
+
1mbar/step
0,05mbar/step
OK OK