240634 / 8146662300
2016-07-11·BA00·III·en·02
Transport and storage
11
(Double) temperature controller and
limiter
Series 8146/5041, 8146/5051
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
6
Transport and storage
• Transport and store the device only in the original packaging.
• Store the device in a dry place (no condensation) and vibration-free.
• Do not drop the device.
7
Mounting and installation
7.1
Dimensions / fastening dimensions
7.2
Mounting / dismounting, operating position
Dimensional drawings (all dimensions in mm) - subject to alterations
06520E00
01668E00
8146/5041-...
temperature controller
8146/5051-ST.25A-ST.25A
double temperature limiter
DANGER
Explosion hazard due to incorrect installation of the device!
Non-compliance results in severe or fatal injuries.
• Carry out installation strictly according to the instructions and national
safety and accident prevention regulations to maintain the explosion
protection.
• Select and install the electrical device so that explosion protection is not
affected due to external influences, i.e. pressure conditions, chemical,
mechanical, thermal and electric impact such as vibration, humidity and
corrosion (see IEC/EN 60079-14).
• The device must only be installed by trained qualified personnel who is
familiar with the relevant standards.
DANGER
Explosion hazard due to open holes or unused cable glands!
Non-compliance results in severe or fatal injuries.
• Always close drilled holes and unused cable glands using approved
stopping plugs or plugs.
• When selecting cable glands, observe the thread type and thread size
in the equipment documentation.
112,50 [4,43]
94 [3,70]
7 [0,28]
9 [0,35]
170 [6,69]
118 [4,65]
7 [0,28]
16 [0,63]
91 [3,59]
104 [4,09]
L
ø 1,50
A
[ø 0,06]
ø D
7 [0,28]
118 [4,65]
170 [6,69]
7 [0,28]
152 [5,98]
170 [6,69]
9,50 [0,37]
L
ø D
A
