Stahl 8146/03, Руководство по эксплуатации

Страница: 25 / 41

137193 / 8146620300
2014-06-26·BA00·III·en·05
Safety Notes
5
Control and Distribution Systems
Series 8146/5
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
3 Safety Notes
3.1 Operating Instructions Storage
• Read the operating instructions carefully and store them at the mounting location of
the device.
• Observe applicable documents and operating instructions of the devices to be
connected.
3.2 Safe Use
• Read and observe the safety notes in these operating instructions!
• Use the device in accordance with its intended and approved purpose only.
• We cannot be held liable for damage caused by incorrect or unauthorized use or by
non-compliance with these operating instructions.
• Before installation and commissioning, make sure that the device is not damaged.
• Work on the device (installation, maintenance, overhaul, repair) may only be carried
out by appropriately authorized and trained personnel.
• During installation and operation observe the information (characteristic values and
rated operating conditions) on the rating, data and information plates located on the
device.
• Always consult with R. STAHL Schaltgeräte GmbH in case of operating conditions
which deviate from the technical data.
3.3 Modifications and Alterations
4 Function and Device Design
4.1 Function
The control and distribution boxes as well as the switching and distribution panels
8146/5 are used together with the built-in devices to control, switch and transfer electric
energy.
WARNING
Danger due to modifications and alterations to the device!
Explosion protection is impaired!
• Do not modify or change the device.
• No liability or warranty for damage resulting from modifications and
alterations.
WARNING
Danger due to improper use!
Explosion protection is impaired!
• The device may only be used according to the operating conditions
described in these operating instructions.